The Benefits of a Central AC Unit
Central air conditioning makes use of ductwork to deliver cool air to every room. An air handler with a filter that captures particulates regulates airflow.
The unit is typically located in an enclosure that is located outside of the house. Its quiet operation increases your comfort by preventing the constant hum or whir of window AC units from disturbing indoor serenity.
Energy Efficiency
Central air conditioners consume more energy than wall-mounted units do, modern systems are more efficient than the ones of the past. The ozone-depleting R22 refrigerant was phased out in 2006 and replaced with 410A. Manufacturers are also continually creating new technologies to make their systems more efficient and use less energy.
Unlike window AC units, which are designed to cool just the area they’re installed in central AC systems can evenly distribute cool air throughout your entire home with air ducts. The cooling process begins when your thermostat tells the air handler to begin cycling on. The air handler is able to pull hot air from your home and then passes it over the evaporator coil that is filled with cool refrigerant. The heat contained in the air causes the refrigerant to absorb energy and transform into a gas. The compressor then raises the temperature and pressure of the refrigerant. As it pumps it pushes the heat away from the evaporator coil and back into the house, where it’s cooled and distributed through your ductwork again.
The reality is that central AC systems are the most efficient option when it comes to controlling the temperature of large spaces. They are able to consistently cool rooms that are further apart than a single wall AC unit can, and they offer better energy efficiency in general.
Depending on how well your home is well-insulated and sealed as well as its layout it’s possible that a mini-split could save you more energy than a central air conditioner however. Mini-splits operate differently than central AC, but they’re often more efficient due to the fact that they do not rely on ductwork which could leak and cause the system to over-work to bring your home up to the desired temperature. If you’re interested in learning more about energy-efficient options for cooling your home, talk with an HVAC expert at your local Dallas heating and air conditioning business. They’ll help you choose the best solution for your particular requirements.
Convenience
In addition to comfort and energy efficiency central air conditioning systems also provide a lot of convenience. They can cool your entire office or home in only one unit and don’t need ducts like window units. They are also fitted with high-quality filters to help keep allergens and pollutants out of the air. This is especially beneficial for those suffering from respiratory or allergies.
Central AC is one of the most popular kinds of cooling systems, and for good reason. This is a great option for homes with ductwork that want a cooling solution. These systems can supply cool air to every room through a single vent and can be used with home zoning, which permits you to control the cooling requirements in different areas of your home with a smart thermostat.
This is the most commonly used type of AC system that functions in a similar manner to furnaces. Central air conditioners comprise an outdoor unit that blasts out warm air, and an indoor air handler that draws in cold or hot air through the ductwork. The refrigerant is pumped through lines that connect to the air handler and absorbs heat as it goes through the process. The cooled air is returned to the air handler in the home and circulated via the ductwork to other rooms.
A further benefit of a central air conditioning system is that it can also aid in reducing humidity. This is especially crucial in our humid climate. The air handler will remove excess moisture from your ductwork, and release it outside. This will help to stop the growth of mildew and mold.
It’s time to upgrade your cooling system if it is older than 15 years. A new, high-quality AC system will help you save money on energy bills and will help safeguard the integrity of the ductwork in your home. Contact Chancey & Reynolds to learn more about our cooling solutions. We can assist you in choosing the right air conditioner to meet your budget and requirements.
Maintenance
Your air conditioner, just like every other major appliance needs regular maintenance to run smoothly. Some routine maintenance can be done by the homeowner while other tasks should be left to licensed experts. Signing up for a maintenance agreement is the best method to keep on top of AC issues. These agreements usually include discounts on repairs, as well as other benefits, like priority scheduling.
Clean the Condenser Unit
A condenser that is dirty will decrease air flow, decrease the efficiency of your system, and increase the cost of energy. Before you begin cleaning, turn off the compressor unit to stop dirt and debris from building up. Then, using an outdoor hose and sponge, gently clean the coil fins and blades of your fan to remove dirt, twigs and leaves. After washing then, use a towel and a spray of sanitation to wipe and sanitize the fan blades. It is also a good idea to straighten any bent fins that could be caused by wind or other weather conditions.
Line Sets
If your central air conditioner is over 10 years old, it is recommended to have a professional inspect the lines, the copper tubes connecting the indoor air conditioning evaporator coil to the outdoor compressor and condenser unit. The lines are filled with refrigerant. any corrosion or cracks can result in leaks, which can result in inadequate cooling and higher utility bills.
Air Filter
To improve the performance of your AC system, change your air filter on a regular basis. The frequency of changing your air filter will depend on how often you run the AC, how many furry family members are living in your home and how much dust accumulates. A typical air filter will last between two weeks and one month during the cooler season.
Condensate Drain Line
If the drain line for your condensation gets blocked by algae, mold, or bugs, the water that collects on the evaporator coil won’t be able to flush away. This could lead to a flooded basement, water damage in your home, as well as mold and mildew growth. In order to prevent this, the float switch located close to your indoor evaporator coil will stop the system when it senses that the drain line has become blocked.